Ricoh Pro C5200s User Manual page 34

2. Getting Started
18. SR5000 series output tray for banner sheet
Allows you to output paper that has a horizontal length of 487.8 mm (19.21 inches) or longer on Finisher
SR5070 or Booklet Finisher SR5080.
19. Booklet Finisher SR4130
Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of
paper in the center and fold them into booklets. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
• Finisher booklet tray
Copies can be punched if the optional punch unit is installed on the finisher.
20. Output jogger
Jogs the sheets delivered to the finisher shift tray.
21. SR4000 series output tray for banner sheet
Allows you to output paper that has a horizontal length of 487.8 mm (19.21 inches) or longer on Finisher
SR4120 or Booklet Finisher SR4130.
22. Finisher SR4120
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
Copies can be punched if the optional punch unit is installed on the finisher.
23. Mailbox
Sorts printed paper. Consists of mailbox output trays 1–9.
• You cannot install multiple finishers simultaneously.
• To use the twin interposer, Finisher SR5070 or Booklet Finisher SR5080 is required.
• To use the Multi-folding unit, Finisher SR4120, Booklet Finisher SR4130, Finisher SR5070, or
Booklet Finisher SR5080 is required.
• To use the interposer, Finisher SR4120 or Booklet Finisher SR4130 is required.
• To use the output jogger, Finisher SR4120 or Booklet Finisher SR4130 is required.
• To use the mailbox, Finisher SR4120 or Booklet Finisher SR4130 is required.
• Remove printouts from Finisher SR4120 or Booklet Finisher SR4130 by lifting them
straightforwardly from the left side. If you remove printouts at an angle or towards the front, the shift
tray may rise and catch them.
32