Reliability; Safety Standards; Printer Installation Position - Epson TM-U200 series Technical Manual

C o n fid e n tia l
Impact resistance:

Reliability

Life
Mechanism:
Print head:
Auto cutter:
MTBF
MCBF

Safety Standards

The following standards are applied only to the printers that are so labeled.
For Europe:
For USA:

Printer Installation Position

Install the printer horizontally. Make sure it does not tilt more than 15°. The printer must also be
installed so that it does not move or vibrate during paper cutting or the drawer kick-out
operation. Fastening tape is available as an option.
Rev. A
When packed:
Package: EPSON standard package
Height: 60 cm (23.62")
Directions: 1 corner, 3 edges, and 6 surfaces
When unpacked:
Height: 5 cm (1.97")
Directions: Lift one edge and release it (for all 4 edges)
7,500,000 lines (See the TM-U200 Series (Type B) Specification for
the print color switching number.
150 million characters (using an average of 2 dots/wire per
character.) (The print pattern is shown in the TM-U200 Series
(Type B) Specification in Figure A-1.)
800,000 cuts
End of life is defined as the point at which the printer reaches the
beginning of the wear out period.
180,000 hours
Failure is defined as a random failure occurring within the time of
the random failure period.
18,000,000 lines
This is an average failure interval based on failures relating to
wear out and random failures up to the life of 7,500,000 lines.
CE Marking: EN55022, EN50082-1, EN45501
Safety standards: TÜV
EMI: FCC class A
Safety standards: UL1950-2TH-D3
c-UL
TM-U200 Series (Type B) Technical Manual
Features and General Specifications 1-7