Main Assembly 8; Carriage Guide Shaft Assembly; Main Assembly 9; Belt Tension Spring Assembly - Epson TM-U200 series Technical Manual

C o n fid e n tia l

Main Assembly 8

Carriage guide shaft assembly

1. Insert the carriage guide shaft through the base frame assembly and carriage sub assembly
and lock it with the RE.

Main Assembly 9

Belt tension spring assembly

1. Hook the belt tension spring to the hooks on the tension plate assembly and paper feed
frame assembly.
2. Push the carriage motor assembly in the direction of the arrow to make sure the motor is
properly placed. Then attach the screw.
Be careful not to move the tension plate assembly when securing the screw.
Rev. A
Carriage guide shaft
Base frame assembly
Carriage motor assembly
Tension plate
assembly's hook
TM-U200 Series (Type B) Technical Manual
Carriage sub assembly
CPS-tite (S-P4) (M3x8)
[0.49 to 0.69 N • m
(5 to 7 kgf •cm)]
Paper feed frame
assembly's hook
Belt tension spring
Disassembly, Assembly, and Adjustment 5-19
RE (2.3)