Character Specifications - Epson TM-U200 series Technical Manual

C o n fid e n tia l
Character dimensions, characters per inch, characters per line
Character Structure
Horizontal x Vertical
7 x 9
9 x 9
7 x 9
9 x 9
NOTE: The default font is 7 x 9; the dot spacing between characters is either 3 half dots or 2 half dots, depending on
the setting of DIP switch 2-1.

Character Specifications

Character sets:
Character structure:
Rev. A
Character Character
Structure Dimensions
Character Set
1.2 x 3.1 mm
ANK
(.047 x .122")
1.7 x 3.1 mm
Graphics
(.070 x .122")
1.6 x 3.1 mm
ANK
(.063 x .122")
2.0 x 3.1 mm
Graphics
(.079 x .122")
1.2 x 3.1 mm
ANK
(.047 x .122")
1.6 x 3.1 mm
Graphics
(.063 x .122")
1.6 x 3.1 mm
ANK
(.063 x .122")
1.9 x 3.1 mm
Graphics
(.075 x .122")
Alphanumeric: 95
International: 32
Graphics: 128 x 8 pages
7 x 9 with 400 half-dot positions per line
9 x 9 with 400 half-dot positions per line
1.24 mm (0.049")
1.59 mm (0.063")
0.353 mm
(0.014")
2.4 mm
(0.094")
0.159 mm (0.006")
Figure 1-3 Character size (7 x 9 font example)
TM-U200 Series (Type B) Technical Manual
Dot Spacing
Between
WxH Characters
3 half dots
0
3 half dots
0
2 half dots
0
2 half dots
0
Features and General Specifications 1-3
Characters Per Characters Per
Line (cpl) Inch (cpi)
40
40
33 13.3
33 13.3
42 17.8
42 17.8
35 14.5
35 14.5
3.1 mm
(0.122")
16
16