Epson TM-U200 series Technical Manual page 140

C o n fid e n tia l
4. While holding the auto-cutter as shown in the illustration, attach the upper case to the lower
case and secure it with the screws.
5. Apply G-31 to both ends of the guide roller.
6. Attach the guide roller to the upper case.
7. Remove any dust and dirt from the switch panel mounting surface and paste the switch
panel on the upper case.
5-40 Disassembly, Assembly, and Adjustment
CPT-B (M3x12)
[0.59 to 0.78 N • m
[6 to 8 kgf • cm)]
Upper case
CPT-B (M3x12)
Switch panel
Apply G-31
Apply G-31
Guide roller
Apply G-31
Paper roll
receiver rollers
Lower case
Rev. A