Removing A Hard Drive From A Hard Drive Carrier - Dell PowerEdge T630 Owner's Manual

4. Remove the screws from the rails on the hot swappable hard drive carrier.
5. Lift the 3.5-inch hard drive adapter out of the 3.5-inch hot swappable hard drive carrier
Figure 43. Removing a 3.5-inch hot swappable hard drive adapter from a 3.5-inch hot swappable hard
drive carrier
1. 3.5 inch hard-drive carrier
3. hard drive adapter
Related Links
Safety instructions
Installing a 3.5-inch hard drive adapter into a hot swap hard drive carrier

Removing a hard drive from a hard drive carrier

Prerequisites
1. Keep the Phillips #1 screwdriver handy.
2. Remove the hard drive carrier from the system.
Steps
1. Remove the screws from the slide rails on the hard drive carrier.
2. Lift the hard drive out of the hard drive carrier.
Figure 44. Removing a hard drive into a hard drive carrier
1. screw (4)
3. hard drive carrier
Related Links
Safety instructions
2. screw (5)
4. 2.5-inch hard drive
2. hard drive
113