Internal Usb Memory Key (Optional); Replacing The Optional Internal Usb Memory Key - Dell PowerEdge T630 Owner's Manual

Figure 50. Installing the slim optical drive blank
1. slim optical drive blank
Related Links
Safety instructions
After working inside your system
Removing the slim optical drive blank

Internal USB memory key (optional)

An optional USB memory key installed inside your system can be used as a boot device, security key, or
mass storage device.
To boot from the USB memory key, configure the USB memory key with a boot image and then specify
the USB memory key in the boot sequence in System Setup.
The internal USB port must be enabled in Internal USB Port option in the Integrated Devices screen of
System Setup.
NOTE: To locate the internal USB port (INT_USB) on the system board, see the System board
jumpers and connectors section.

Replacing the optional internal USB memory key

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
2. optical drive blank lock
121