Installing A 3.5-Inch Hard Drive Blank - Dell PowerEdge T630 Owner's Manual

Figure 38. Removing a 3.5 inch hard drive blank
1. hard drive blank
Next steps
If applicable, install the front bezel.
Related Links
Safety instructions
Installing the optional front bezel

Installing a 3.5-inch hard drive blank

Safety instructions
Installing a 3.5-inch hard drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 39. Installing a 3.5 inch hard drive blank
1. hard drive blank
Next steps
If applicable, install the front bezel.
2. release button
109