Aastra DT412 User Manual page 86

Voice Mail Services
å
å
å
86
A new menu is therefore played, which prompts you to:
• Dial "1" to hear the number currently saved for your personal
assistant. This information is played back for you through voice
synthesis, one digit at a time
• Dial the sequence: "2 <Personal assistant number> #" to save
your personal assistant's number. It may consist of an internal
or external number, containing up to 18 digits, including the
external network access prefix.
• Dial "4" to erase the number currently saved for your personal
assistant. It is then replaced by a number for a facility attendant.
• Dial "9" to return to the main mailbox personalization menu.
Dial "2" to manage a possible external notification for
messages left in your mailbox.
This especially applies if your mailbox is managed in recording or
personal assistant mode.
A new menu is therefore played, which prompts you to:
• Dial "1" to hear the number currently saved for external
notification. This information is played back for you through
voice synthesis, one digit at a time.
• Dial the sequence: "2 <External recipient number> #" to save
your external notification recipient number. It may contain up to
18 digits, including the network access prefix.
• Dial "3" to activate or de-activate the external notification
service. If the service was initially inactive, it will be activated,
and vice versa. Deactivating the service has no impact on the
recipient number for the service that is reputed and remains
programmed.
• Dial "4" to erase the number currently saved for external
notification.
• Dial "9" to return to the main mailbox personalization menu.
Dial "4" to manage your user password.
Your user password is the some as the one to access your mailbox
and activate or deactivate certain services from your extension.
(See section "Password
By default, it is set to "1234". You may replace it with any other 4-
digit code.
Dial "3" to protect your extension from calls sent from an
automated attendant (AA).
If the service was initially inactive, it will be activated, and vice
versa.
MD Evolution – Cordless DT412 / DT422 / DT432
Programming" on page 110).