Aastra DT412 User Manual page 138

DT4X2 Adjustments
â
or
Select
138
Change system
When you have registered to more than one system, you can
manually select which system to connect to. You can connect to
up to four different PBX systems with your phone, normally named
A, B, C and D.
á
When you have entered settings:
á
Select
System
ã
Select
Select system
Select the required system.
Note: The normal setting is Auto. This setting makes the
phone automatically look and connect to a system.
Press (see display).
System selected
System information
The
Information
and your network connection.
á
When you have entered settings:
ã
Select
System
á
Select
Information
Press.
You can view the following information:
IPEI
IPDI
SW version
AP SW version
Note: You cannot alter these settings.
.
.
is shown.
menu shows general information about your phone
.
.
The unique global GAP registration number for
the phone.
The unique global GAP registration number for
the SIM card.
Here you can see which version of the phone
software you have.
The alarm module software. If the alarm module
is not connected, it will be indicated with
Connected).
MD Evolution – Cordless DT412 / DT422 / DT432
(Not
NC