Ending Calls - Aastra DT412 User Manual

MD Evolution – Cordless DT412 / DT422 / DT432
DTMF End-to-End Dialling
At times, you may need to call external servers, such as a
reservation centre server, when you are required to communicate
interactively through the online transmission of various dialling
codes.
Your extension makes this option available to you through the
DTMF end-to-end dialling service. With this service, you can
directly exchange dialling codes with a remote server, without your
dialling being interpreted by your local facility.
This is processed through the exchange of DTMF codes, from
which the service's name is derived.
*
To use this service when placing an external call:
Dial the "*" code to access to the DTMF end-to-end dialling
service.
Everything that is dialled thereafter is then directly transmitted to
the remote server.
Note: When you interact with the voice mail system, or the
automated attendant possibly integrated in your facility, the
aforementioned operations are not required. DTMF end-to-
end dialling is automatic. See also section
Services" on page 73.

Ending Calls

You may, at any time, end an ongoing call, or an outgoing call that
is being established.
æ
This is done in the same way as with an incoming call:
Press.
Your extension returns to idle status.
Outgoing Calls, Busy/No-Answer
"Voice Mail
47