Replacing The Power Supply - HP blackbird 002 Service Manual

Replacing the power supply

1 Align the four (inner) screw holes in the power supply bracket (C) with the screw holes
on the face of the power supply.
2 Insert four screws (C) to secure the bracket to the power supply.
C
B
B
3 From the back of the chassis, insert the power supply assembly into the opening (D).
D
4 Tighten the four screws (B) in the bracket to secure the power supply assembly in the
chassis.
C
C
Upgrading and Servicing Guide
B
C
B
47