HP blackbird 002 Service Manual page 42

38
Upgrading and Servicing Guide
2 Press the module into place, and ensure that the retaining clips close by pressing them
toward the module.
3 If necessary, replace the card you removed from the top add-in card slot. See
"Removing and Installing an Add-in Card" on page 39.
4 Replace the thermal divider, replace and close the PCI door, close the left access door
and the computer. See "Opening and Closing the Computer" on page 1.
NOTE: If a blank screen displays after you replace or add a memory module, the memory
module is installed incorrectly, or it is of the wrong type. Remove and reinstall the memory
module.