HP blackbird 002 Service Manual page 52

K J
I
48
Upgrading and Servicing Guide
5 Inside the chassis, connect the plugs previously removed from the power supply.
Match the power supply connector color to the plug, and check the power supply
label for connector usage.
WARNING: If you disconnect the power connector for the liquid cooling system,
ensure that it is reconnected prior to connecting power and turning on the
computer. Failure to do so may result in damage to the cooling system and to
the computer.
IMPORTANT: Some graphics cards require two power cable plugs. These two
power cables must connect to power supply connectors that are in the same row of the
power supply. Do NOT connect the two power cables from one graphics card to
connectors on different rows of the power supply.
A B
G
H
A 12V6 (PCI-E), blue connector
B 12V6 (PCI-E), blue connector
C 12V4 (SATA/IDE), black connector
D 12V4 (SATA/IDE), black connector
E 12V3 (SATA/IDE), black connector
F 12V3 (SATA/IDE), black connector
G 12V1, black connector
H 12V2 (CPU), turquoise connector
I 12V5 (PCI-E), black connector
C D E
F