Removing And Replacing Drives; Removing An Optical Drive - HP blackbird 002 Service Manual

Removing and Replacing Drives

Your computer has several drives that you can replace or upgrade. See "Locating
Components Inside the Computer" on page 22 for drive locations.
The primary hard disk drive, as well as each of the optional hard disk drives, is a Serial
ATA (advanced technology attachment) drive. The chassis has bays for up to four
additional optional hard disk drives.
CAUTION: Before removing the hard disk drive, back up your personal files
that are on the drive to an external storage device, such as a CD or DVD.
Failure to do so may result in data loss. After replacing the primary hard disk
drive, you use the recovery discs to load the factory-installed files onto the
drive. For details about the recovery procedure, see the user documentation
that came with your computer.
You can add an optical drive to the optional slim optical drive bay or to the 5.25-inch
full-size bay. Each bay comes with an empty slot filler.
IMPORTANT: Before adding a new optical drive, ensure that it is compatible with the
computer. Also, ensure that you have the correct software for the drive to work with the
operating system.

Removing an optical drive

Complete the steps for either the slim optical disc drive or the full-size drive.
Removing a slim optical disc drive
1 Prepare the computer to be opened, and then open the left access door. See
"Opening and Closing the Computer" on page 1.
IMPORTANT: You must remove the optional slim optical disc drive before removing
the primary slim optical disc drive.
Upgrading and Servicing Guide
23