Product - Breville RM-BBM800XL Instruction Book

OPERATING YOUR BREVILLE CERTIFIED REMANUFACTURED PRODUCT - BEGINNER'S GUIDE
a) Ensure the bread pan is in the baking chamber.
b) Lift open the lid of the main stainless steel housing. The base
of the Automatic Fruit and Nut Dispenser can be identifi ed
by the row of steam vents. Push in the base until it clicks into
place. Close the main stainless steel housing lid.
c) Lift open the lid of the Automatic Fruit and Nut Dispenser then
add a maximum ¾ cup of dry ingredients. Always remember:
− Ingredients should be suitably sized so they do not fall
through the steam vents at the base of the dispenser.
We recommend separating ingredients that may stick
together, such as raisins and other fruits, before adding.
− Liquids should not be added to the dispenser.
− Glace (glazed) fruits such as cherries, ginger, pineapple; and
bottled or canned ingredients such as olives and sun dried
tomatoes etc. should be washed and thoroughly dried on
kitchen paper towel before adding into the dispenser.
− It is recommended that the dispenser be cleaned
thoroughly with a soft, damp cloth after each use.
d) The Fruit and Nut Dispenser will automatically release
its contents on the BASIC, BASIC RAPID, WHOLE
WHEAT, WHOLE WHEAT RAPID, GLUTEN FREE,
16
CRUSTY LOAF, SWEET, YEAST FREE and all DOUGH
settings. You may notice the base of the dispenser fl ip
open during the bread making cycle even when it is empty.
This is normal. It is the dispenser automatically releasing
ingredients 8 minutes before the end of the KNEAD 2
phase, regardless of whether it has been loaded.
TIP
If ingredients exceed the maximum ¾ cup capacity of the
dispenser, lift open the lid and add ingredients manually
when the ADD-IN alert sounds 8 minutes before the
end of the KNEAD 2 phase. Ensure the BEEPER button
has not been muted and the sound alerts are on - there
should be no symbol on the LCD screen. Do not press
and hold the CANCEL button to add ingredients as this
will cancel the entire cycle.
6. Plug in the Power Cord
a) Unwind the power cord completely and insert the power
plug into a grounded power outlet.
b) An alert will sound and the LCD screen will illuminate. The
function options will appear with an indicator on the preset
BASIC setting.
7. Select the Setting
a) Turn the SELECT push-dial until the indicator on the
LCD screen reaches the desired setting. Press the push-
dial to select.
b) If you accidentally press the wrong setting, press the
CANCEL button to return to the main menu and make your
selection again.