2N EasyGate Pro User Manual page 43

Setting options: 0-255 h
Step: 1 h
Default setting: 0
Battery status SMS (Function No.: 962)
Setting of this parameter allows sending SMS with information with battery status.
Disconnecting of battery (Battery Error) and connecting of battery (Battery Ready)
and critically low voltage (Battery flat) is reported by SMS.
Setting options: enable (1)
disable (0)
Default setting: disable
Power failure SMS (Function No.: 963)
Mains status can be reported when this parameter is set. The report about mains
failure and recover is sent with defined delay (Power off/on).
Setting options: disable (0)
Enable with delay 1-255 min
Default setting: disable
Initialization
All programmable parameters are arranged in tables according to their functions. You
can initialize either all parameters at once or one table of parameters.
Telephone line initialization FXS (Function No.: -)
Initialization of all parameters necessary for the telephone line FXS.
Call table initialization FXS (Function No.: -)
Initialization of all parameters related to FXS routing table.
Call table initialization GSM (Function No.: -)
Initialization of all parameters related to GSM routing table.
Initialization of GSM & SIM (Function No.: -)
Initialization of all parameters related to the GSM network and SIM card (except the
PIN code).
SMS input initialization (Function No.: -)
Initialization of all parameters for SMS sending upon SMS input activation.
Global initialization (Function No.: 999)
Initialization of all EasyGate parameters including the PIN and service password.
2N TELEKOMUNIKACE a.s., www.2n.cz 43/70