2N EasyGate Pro User Manual page 33

An example in the figure below shows how to bar all international calls with the
exception of calls to Slovakia including dialing acceleration by selecting the number
length parameter and tariff setting (5 impulses after call connect and then one impulse
every 10 seconds). All other calls are enabled and their tariff is one impulse every 30
second.
Operator for Integra (Function No.: 405)
In some GSM networks you can add to dialed number # character and PBX subscriber
number. Subscriber number is displayed on other side together with CLI. This
parameter take place when dialed number doesn't contain # character.
Setting options: 0-8 characters (0-9)
Default setting: blank
Caution!
Configuration using phone line programming (DTMF) is applicable for
line 'Other prefixes' only.
Prefix (Function No.:-)
A prefix identifying the call type (GSM, trunk call, free call, etc.). "Other numbers" line
is used for calls
Setting options:0-14 characters (0-9,*,#)
Default setting: blank
Call enable (Function No.: 391)
This parameter allows/bars calls with prefixes included on the same line.
Setting options: YES/NO
2N TELEKOMUNIKACE a.s., www.2n.cz
Routing table
with prefixes that are not included in the table.
33/70