Caution
Configuration using phone line programming (DTMF) is applicable for
line 'Other prefixes' only.
CLI – calling number (Function No.: -)
Fill in CLI, to route the call according to parameter on the same table line. It is possible
to fill in only prefix for group of CLI's. If parameter "Substring" = 0, you must fill prefix
as you see it on display of your mobile phone - It means inclusive of + and
international prefix if they are included. If parameter "Substring" > 0, 2N® SmartGate
UMTS searches filled prefix as substring of the received CLI, but max. to position given
by "Substring" parameter. Positions are counted from zero. See examples in
"Substring" parameter hint.
Setting options: 0-16 characters (0-9,*,#,+)
Default setting: blank
Substring (Function No.: -)
Parameter is used to make filling CLI prefix easier. If parameter "Substring" > 0,
EasyGate searches filled prefix as substring of the received CLI, but max. to position
given by "Substring" parameter. Positions are counted from zero.
for example received CLI +420603198222 corresponds with settings:
CLI - calling number
+420603198222
+420603
+420
603198222
603
Setting options: 0-15
Step: 1
Default setting: 0
2N TELEKOMUNIKACE a.s., www.2n.cz
Substring
any setting
any setting
any setting
4, or more
4, or more
37/70