EdilKamin SIDE 50x50 Installation - Use - Maintenance page 24

F-G)
it is therefore essential to ensure this
intake capacity.
The said connection must directly link
The mechanism, delivered separately,
with screws and apply the regulation
mechanism using the same screws.
- Take care to seal the points where air
dispersion could occur.
It is advisable to apply to the outer part
of the air intake vent a protective grill,
pacity, however.
case of bends, increase the indicated sec-
tion by 10% to 20%.
level (it must not be taken in from a
higher position).
In positioning the control wire of the
external air gate, take care that it does
not come into contact with the hot
damage the plastic coating.
INSTALLATION
-
Fig. C
10
-
Fig. D
Fig. E
Fig. F
Fig. G
- 24
A
-