EdilKamin SIDE 50x50 Installation - Use - Maintenance page 16

FUNCTIONING DIAGRAM
The structure is composed of a steel plate body complete with
supporting framework (which can be removed to position the
The structure is complete with a shell which creates a cavity for
the circulation of the heating air.
The heating air can circulate by natural convection (version N)
or by forced ventilation (version V).
The system to allow
carefully designed to guarantee optimal combustion, a control-
The primary combustion air (A) enters at the base of the
of the embers.
increased, or reduced if the draught is too strong.
The secondary combustion air (B) which also keeps the
glass clean enters from the top of the glass itself after being
The post-combustion air (C)
from holes of variable diameter on the base.
triggers off a second combustion process which burns the non-
this process is called post-combustion.
KEY:
1) fume exit connection
2)
3) fume deviator duct
4) steel structure
5) secondary and cleaning air input duct
6)
increase the combustion temperature
7) ceramic glass, shockproof and heat resistant up to 800° C
8) removable handle
9) in which the embers burn and which gives optimal
combustion
10) external air vent connection (lower or rear)
11) shell for heating air circulation
12) heating air vent (recirculation)
13) mobile damper to regulate the primary air for
combustion
14) hot air output vent (D)
-
-
-
, very thick in order to
- 16
-
14
D
B
5
7
6
13
8
10
10
Fig. 1
6
9
Fig. 2
13
1
11
2
4
3
C
9
12
8
A
13
R