KROHNE IFC 050 Manual page 24

ELECTRICAL CONNECTIONS
4
Figure 4-4: Field current cable C, preparation for the signal converter
a = 80 mm / 3.15"
1 Strip the conductor to dimension a.
2 If a stranded drain wire is present, remove the shield that is present. Make sure not to damage
the stranded drain wire.
3 Slide an insulating tube over the stranded drain wire.
4 Crimp a wire end ferrule onto the stranded drain wire.
5 Crimp the wire end ferrules on the conductors.
6 Pull a shrinkable tube over the prepared cable.
24 www.krohne.com
IFC 050
09/2016 - 4002184003 - MA IFC 050 R03 en