Exhaust System - Mercedes-Benz E-Class Series 207 Service Manual

Exhaust system

Extraction device, exhaust funnel with internal clamping
Manufacturer Nederman Ph. & Co AB (S)
Order number 20867261
Extraction device, socket with internal clamping
Manufacturer NORFI Absaugtechnik GmbH
Order number 25-4950-103
i Note on the extraction devices
The clamp operates inside the tailpipe of the exhaust system. Exhaust sockets can be ordered from the
manufacturers listed from mid-January 2009.
Information on the socket and ordering addresses are published in GOTIS under:
Chapter U, Design Group 00.21, Topic 03.1
126
Introduction of the New E-Class Coupé, Model Series 207
b
Use Exhaust socket for vehicles with tail pipe
finishers integrated in the bumper and
vehicles with straight exhaust tail pipes.
Sysdhamnsgatan 2
S-25228 Helsingborg
www.nedermann.se
Nederman GmbH (D)
Kelterstrasse 65
D-72669 Unterensingen
www.nederman.de
Use Exhaust socket for vehicles with tail pipe
finishers integrated in the bumper and
vehicles with straight exhaust tail pipes.
Kelterstr. 65
D-72669 Unterensingen
www.norfi.de
– This printout will not be recorded by the update service. Status: 01 / 2009 –
P58.40-2086-00
P58.40-2087-00