GE IC754CSF15CTD Hardware User's Manual page 49

To set the double-tap sensitivity
1. In the Control Panel, double-tap
The Stylus Properties dialog box appears.
2. Choose the Double-Tap tab.
3. Double-tap the grid to enter a setting.
4. Double-tap the test icon to check the setting.
If the test icon doesn't change when you double-tap it, double-tap the
grid again.
5. Tap OK to finish.
6. To save the settings, run the
chapter 2
GFK-2402D
.
Chapter 4 Detailed Operation
Stylus.
Backup utility as described in
4
4-7