Design Specifications; Physical; Dc Power - GE IC754CSF15CTD Hardware User's Manual

Appendix
A

Design Specifications

The specifications listed in this appendix are the design goals for the
QuickPanel View/Control. In most cases the "as built" or tested
specifications are identical. See page A-6 for a list of agency approvals for
environmental service and safety.

Physical

Enclosure dimensions
(actual – see "Getting Started"
in chapter 1 for cutout dimensions)
Bezel dimensions
Weight

DC Power

Input Voltage
Power Dip Tolerance
Insulation Resistance
Real Power
Power Supply Conductor Size
Connector (Vendor, p/n)
GFK-2402D
Height: 11.968 in (304.0 mm)
Width: 14.855 in (377.3 mm)
Depth: 2.782in (70.7 mm)
Height: 12.725 in (323.2 mm)
Width: 15.7 in. (398.8mm)
Depth: 0.4 in (10.2 mm)
10.3 lb (4.67 kg)
9.6 to 28.8 VDC
-30% nominal input voltage, 10msec.
>300Mohm @ 1000V frame ground to 0V
>300Mohm @ 1000V frame ground to 24V
48 W
12 to 18 AWG For compliance to CE Mark, the
isolated frame ground must be connected.
Recommended frame ground connection is via the
shortest possible route, using 14 AWG.
Phoenix Contact, 1777992
Note: The torque range for the attaching
screws is 4 to 6 inch/lbs.
A-1