GE IC754CSF15CTD Hardware User's Manual page 52

4
The SHIFT key is active while the next key is pressed then reverts back to
its unselected state. The CAP key does the same thing as SHIFT but does
not revert to lower case after another key is pressed. Pressing the CAP key
causes the Soft Input Panel to remain in upper case mode. The CTRL and
ALT keys behave the same as the SHIFT key.
Upper Case
To reset the SIP Location
If you accidentally drop the SIP off screen and can't drag it back on screen,
complete the following steps to reset the SIP to the center of the screen.
1. In the Control Panel, double-tap Input Panel.
The Input Panel Properties dialog box, shown above, appears.
2. Click Reset SIP location.
External Mouse (optional)
Any USB mouse compatible with the QuickPanel View/Control can be used
as an input device for the unit. The USB driver for the mouse is included
with the operating system and no setup is required. To use an external
mouse, simply plug it into the appropriate port.
A list of mice (and other devices) that have been tested and are compatible
can be found by visiting the Technical Support website. In the ―Technical
Resources ―Browse by Product‖ section of the page, choose the Operator
Interface Product Category, and the QuickPanel View Product Name.
– December 2011
4-10 GFK-2402D
15" QuickPanel* View & QuickPanel Control Loaded Color TFT