Table of Contents
Advertisement
To remove the internal battery
1. Disconnect AC power from the DC supply.
2. Open the rear access panel.
3. Release the battery by gently lifting it from the completely exposed side,
past the small protrusions. To avoid breaking the battery retainer clips,
do not apply excessive upward pressure.
4. Slide the battery out of its carrier, noting the arrow on the carrier
indicating the direction of removal.
To install a new battery
1. Disconnect power from the DC supply.
2. Open the rear access panel.
Note:
3. To install the battery, insert one side of battery into upper side of battery
clip, then press other side into clip until snaps into place.
Replace battery with Panasonic BR2032 only. Use of another
battery may present a risk of fire or explosion.
Battery may explode if mistreated. Do not recharge,
disassemble or dispose of in fire.
GFK-2402D
Battery must be installed with positive ( + ) side up.
Chapter 4 Detailed Operation
Warning
Warning
4
4-45
Hide quick links:
Advertisement
Table of Contents
