GE IC754CSF15CTD Hardware User's Manual page 83

To change the DRAM memory allocation
1. In the Control Panel, double-tap
dialog box appears.
2. On the Memory tab, drag the slider to divide the DRAM into Storage and
Program memory.
The amount of memory allocated to and used by each area is shown on
the dialog box. The amount of memory allocated to and used by each
area is displayed numerically. The blue bar indicates the current
amount of unallocated DRAM and determines the boundaries within
which the slider can move.
3. Tap OK to apply the new setting.
4. To save the settings, run
chapter 2.
Boot Loader ROM
The Boot Loader ROM provides 512 KB of non-volatile storage for the
QuickPanel View/Control's initialization program. This program configures
the QuickPanel View/Control hardware then starts the operating system's
execution. This memory is not accessible from Windows CE Explorer, nor
should any attempts be made to modify the contents of this ROM.
GFK-2402D
the Backup utility as described in
Chapter 4 Detailed Operation
System. The System Properties
4
4-41