GE IC754CSF15CTD Hardware User's Manual page 88

4
Real-time Clock
The QuickPanel View/Control has a programmable real-time clock capable
of reporting the current time in Year/Month/Day/Hour/Minute/Second. The
time is set from the Windows CE interface and retained through a power
cycle if battery backup is available. Daylight saving time is enabled by a
check box within the dialog box. The time can be displayed in the system
tray on the task bar.
To set the real-time clock
1. In the Control Panel, double-tap
The Date/Time Properties dialog box appears.
Note:
2.
To modify the date, select the Date/Time tab.
3. Tap the year to choose a new year; tap the month to choose a new
month.
4. Tap a date to specify the day of month.
5. From the Time Zone box, choose your zone.
6. Select Auto Adjust DST to configure the clock to automatically
compensate for daylight savings time.
7. In the Current Time box, adjust the hours, minutes and seconds.
4-46
15" QuickPanel* View & QuickPanel Control Loaded Color TFT
Tap Apply after making changes in any box.
Date/Time.
– December 2011
GFK-2402D