Table of Contents
Advertisement
When the switch is set to ―ON‖, the startup programs are forced to run and
the ―Don't run Startup Programs‖ button is not available on the startup
splash screen.
Note:
To configure startup behavior
Disconnect the AC power from your DC power supply before
opening the QuickPanel View/Control. Working on a "live"
unit may result in damage to equipment and injury to
personnel. Always use anti-static precautions (i.e. grounded
wrist strap) when accessing the interior of the unit.
Do Not Allow conductive material, liquid or solid, to contact
the electronics of the QuickPanel.
1. Open the back cover of the QuickPanel View/Control.
2. Locate the DIP switches and set DIP switch 2 to ―ON‖.
The startup applications are now forced.
Note:
GFK-2402D
Do not adjust switches other than switch 2. They are reserved for
factory functions. Also note that the ―Off‖ position of the switches is
toward the DIMM connector, ―On‖ toward the COM1 connector.
Do not adjust the other switches. They are reserved for factory
functions.
Chapter 4 Detailed Operation
Caution
Caution
4
4-37
Hide quick links:
Advertisement
Table of Contents
