Ethernet
The QuickPanel View/Control is equipped with two 10BaseT/100BaseTX
auto-negotiate, full or half duplex Ethernet ports (IEEE802.3). You can
connect an Ethernet network cable (unshielded, twisted pair, UTP CAT 5) to
the unit via the RJ45 connectors on the bottom of the enclosure. LED
indicators on the port indicate channel status. Access to the port is possible
either by Windows CE network communications, or by your custom
application. The following diagram shows the location, orientation, and pin
out of the Ethernet port.
On: Packet received
or transmitted.
GFK-2402D
On: Channel
connected OK.
Chapter 4 Detailed Operation
1
TX_D1 +
2
TX_D1
3
RX_D2 +
4
B1_D3 +
5
B1_D3
6
RX_D2
7
B1_D4 +
8
B1_D4
4
4-25