GE IC754CSF15CTD Hardware User's Manual page 60

4
6. Enter the Host Name or IP address for a VPN connection, or a PPPoE
Service Name for a PPPoE connection.
You can configure your TCP/IP Settings at this time if you wish.
7. Tap Finish.
To change the default device properties
1. From either the Device or Modem dialog box, tap Configure.
The Device Properties dialog box appears.
2. In the Port Settings tab, choose settings for all connection preferences.
3. If the connection is for terminal emulation, select or clear the terminal-
related check boxes.
You can use the QuickPanel View/Control to emulate a terminal
attached via a modem link (Hayes compatible) to COM1. A terminal
emulation definition is added as a unique session.
4-18
15" QuickPanel* View & QuickPanel Control Loaded Color TFT
– December 2011
GFK-2402D