Gorenje HW 2500L Instructions For Use And Installation page 9

Wi-Fi
setting
Connect
the
Android/i
OS Heater
device
and the
heater
Mobile
connecting
Other
mobile
connecting
Change
language.
Wi-Fi type: Currently only support 802.11 b/g ,802.11 n is unavailable
yet. Since the general wireless router is mixed with b/g/n mode, can
automatically adapt to it.
SSID & Password: Currently only support English and normal
keyboard character, Wi-Fi name and password please do not set with
Japanese，Spanish, Korea and other special character.
Please ensure the heater is within the scope of the effective Wi-Fi
signal, and closer to the Wi-Fi router is better.
Please switch on the heater, the first time when you put on the
product, the Wi-Fi indicator should be on with a quick flashing.
If you have connected the Wi-Fi before, and the Wi-Fi was changed.
please long-press the Wi-Fi button behind the product until the Wi-Fi
indicator starts quick flashing. And heater is under at the configuration
state at this moment.
Please turn off the data network, turn on the Wi-Fi, and connect it.
Open the app, click "add new device", input the Wi-Fi SSID &
password, and wait for 160s till it's connected.
Please make sure mobile phone is using the same Wi-Fi as the
heater. Install the app then open it, user can find the device with a litte
hand, then input the default password for connecting:123456
9
Chose English.