Gorenje HW 2500L Instructions For Use And Installation page 7

7.) Timer settings:
By pressing
to set the timer.
Timer off range 1-12 hours.
If the value shows 0 in timer setting, the time indicator will be off, LED display will show the
current room temperature.
8.) Temperature settings:
By pressing
be on, the LED light will flicker.
Temperature range 5℃~ 35℃. Press
Room temperature > Set temperature:
Ceramic heater and fan OFF.
Room temperature 2℃ lower < Set temperature:
Heating function and fan ON.
When setting the time and temperature at the same time, timing, and the room temperature
and timing display interactively, interval is 30 seconds. When the timing is not set, only
display setting temperature.
If no operation to the keys after 5 seconds, then the LED indicator will show the room
temperature.
9.) Continuous electric memory function:
Under standby mode, press key
time setting, except the timing function.
10． Reduced brightness :
After 1 minute of normal operation the brightness of the display should be reduced to 1/3 of the
normal brightness, solving the problem of LED lamp dazzling in night.
Wi-Fi FUNCTION
Necessary equipment:
Heater
Wi-Fi router
Android/iOS device.
If you want to use Wi-Fi function, you must connect the unit and your cell phone at the same Wi-Fi
for the first time.
Function of Wi-Fi:
Control the unit remotely by setting the power on/off, timer, power high/low,
swing...
Check the room temperature and setting temperature, energy consumption on
your Android/iOS device.
button the timer indicator will be on, the LED light flickers. Press
button , enter in to temperature settings, the temperature indicator light will
the unit will keep working as the same status as last
7
key to set temperature.
key