Gorenje HW 2500L Instructions For Use And Installation page 6

PRODUCT INSTALLATION AND
OPERATING INSTRUCTIONS
1.) Product installation
Step 1：Open the packing, take the product out and take off the poly-bag.
Step 2：Set the machine up, install base and fix screw on the smooth surface.
2.）Operating instruction
Connect the power cord with correct power supply and turn on the power switch on the back of the
product.
3.) Power ON/OFF:
By pressing key, the device start working. Press it again, device is turned off, digital LCD display
show shutdown function (10→0).
Default settings during first power:
Low heating power
LED display show default temperature 25℃.
Fan ON.
Timer and swing OFF.
4.) Adjusting heating power:
By pressing key shift from high heating power to low heating power.
Heating mode:
a) Low heating power.
b) High heating power: PTCL and PTCH are turned on. PTCH delay work after 20 seconds.
5.) ECO mode:
Default temperature 22℃:
Room temperature < 18℃,
Heater works with high heating power.
Room temperature > 18℃,
Heater works with low heating power.
Room temperature > 22℃,
Heater stops, indicator shows room temperature.
6.) Swing:
By pressing
.
button device oscillate, the
6
indicator will be on, press again, to turn it off.