Toshiba e-STUDIO163 Service Manual page 205
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO163:
- Service manual (236 pages) ,
- Service handbook (235 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
(4)
Remove 1 C-ring and 1 bearing on the front
side of the fuser roller.
(5)
Remove 1 C-ring, 1 gear and 1 bearing on
the rear side of the fuser roller.
[H] Pressure roller
(1)
Take off the pressure roller unit.
P.13-11 "[B] Pressure roller unit / Fuser
roller unit"
(2)
Remove 3 screws, and then take off the
fuser unit entrance guide.
(3)
Remove 2 springs.
Note:
When installing the spring, be sure to hang
the spring on the upper hook.
December 2005 © TOSHIBA TEC
Bearing
C-ring
Fig. 13-23
Fuser unit entrance guide
Fig. 13-24
Spring
Fig. 13-25
13 - 17
C-ring
Gear
Bearing
e-STUDIO163/203 FUSER / EXIT UNIT
13
Advertisement
Table of Contents
