Toshiba e-STUDIO163 Service Manual page 140

(3) Slide the bypass pickup solenoid upward,
and take off the bypass pickup solenoid with
its spring.
[I] Bypass pickup clutch / Bypass feed clutch
(1) Take off the bypass unit.
P.10-8 "[A] Bypass unit"
(2) Remove 1 E-ring, 1 bushing and 2 screws.
Then take off the 2 gears and the bracket.
(3) Remove 1 E-ring, and take off the bypass
pickup clutch with its shaft.
e-STUDIO163/203 PAPER FEEDING SYSTEM
Bypass pickup solenoid
Spring
Gear
Bushing
E-ring
E-ring
10 - 14
Fig. 10-22
Gear
Bracket
Fig. 10-23
Bypass pickup clutch
Fig. 10-24
December 2005 © TOSHIBA TEC