Toshiba e-STUDIO163 Service Manual page 138
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO163:
- Service manual (236 pages) ,
- Service handbook (235 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
[E] Bypass pickup roller
(1)
Take off the bypass roller unit.
P.10-11 "[D] Bypass roller unit"
(2)
Take off the bypass pickup roller and the
shaft.
[F] Bypass feed roller
(1)
Take off the bypass roller unit.
P.10-11 "[D] Bypass roller unit"
(2)
Remove 1 clip. Then pull out the shaft and
remove 1 pin.
(3)
Take off the bypass feed roller.
e-STUDIO163/203 PAPER FEEDING SYSTEM
Shaft
Bypass pickup roller
Shaft
10 - 12
Fig. 10-17
Pin
Bypass feed roller
Clip
Fig. 10-18
December 2005 © TOSHIBA TEC
Advertisement
Table of Contents
