Toshiba e-STUDIO163 Service Manual page 160
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO163:
- Service manual (236 pages) ,
- Service handbook (235 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
(3)
Release the harness from the harness clamp
and pull out the discharge LED.
[D] Main charger
(1)
Take off the discharge LED unit.
P.11-11 "[C] Discharge LED (ERS)"
(2)
Pull out the main charger and take it off by
sliding it to the rear side.
Note:
Be careful not to touch or scratch the drum
surface at this time.
[E] Main charger grid
(1)
Take off the main charger.
P.11-12 "[D] Main charger"
(2)
Remove the spring and take off the main
charger grid.
Note:
Do not touch the mesh area of the grid.
e-STUDIO163/203 DRUM RELATED SECTION
11 - 12
Discharge LED
Fig. 11-12
Main charger
Fig. 11-13
Main charger grid
Spring
Fig. 11-14
December 2005 © TOSHIBA TEC
Advertisement
Table of Contents
