Service
manual
Adjusting doors (gasket)
Check that the loading door gasket is
clean and in good condition. Use a suitable
cleaner. Do not use solvents that may
damage sensitive plastics or painted finish.
Fig. 1 Check that the felt sealing ring A is
intact and in good condition.
There must be a maximum of 2 mm
between steel frame and felt.
Fig. 2 Adjusting of space is done by
loosening screws B holding gliding shoe
and pushing the doors into place.
There must be a maximum of 2 mm
between steel frame and felt.
Check and tighten all screws B (with 6 Nm)
holding the gliding shoes.
B
B
B
B
Sliding Door
1
B
B
2
B
B
A
A
Max. 2 mm
B
93