Resetting Gas Error E14 - Electrolux T4900 Service Manual

Continued
• Fig. 5 The control box could be defective.
Replace the defective control box.
As mentioned earlier gas heating problems
often occur due to shortage in the air supply. It
is therefore very important that the air supply to
the room is sufficient. The flame must be bluish
as a yellowish flame indicates a shortage in the
air supply. The glare from the flame is visable
through the loading door glass, fig. 6.
A rule of thumb for dimensioning the room's
air inlet is that the air inlet opening must be 5
times the size of the air outlet opening.
To read more about the exhaust system see
the installation manual for T31200 /T3900,
TD135/TD100.
Resetting gas error E 14
When resetting gas error E-14 the dryer must
operate on a program with heat and the heat
indicator must be on.
Fig. 7a On a dryer with standard door the gas
reset button is on the control box.
Fig. 7b On Sliding Door, the gas reset button is
on the rear of of the control panel.
The dryer must only be reset 3 times. If the
dryer, however, has to be reset more than
three times it has to be put out of order and
a service technician must be called (does not
apply for Japan).
7b
Gas reset
button
68
Heating - gas
Heat
indicator
5
Control box
6
Inspection
7a
Gas reset
button
Service
manual
487 22 93 42.00