Electrolux T4900 Service Manual page 79

Service
manual
Replacing bearing or drum
Dismount drum and bearing
• Remove the machine's front panel and
lower rear panel, refer to "Removal of the
front panel and lower rear panel"
• Remove the 2 V-belts (J).
1
• Remove screws (K) in order to dismount
2
the pulley. Mount one screw in hole (L). The
clamping sleeve is loosened when hole L is
being used.
• Dismount pulley.
• Dismount wedge (M).
3
• Loosen the 2 tailstock screws (N).
Drum with bearing
1
2
3
J
IMGT4CR20
79