Electrolux T4900 Service Manual page 81

Service
manual
Remount drum and bearing
• Remount in the opposite order.
• Place drum carefully. Use Antifret paste or
similar quality to lubricate the bearing surface.
NOTE!
After mounting the drum tighten the
4 nuts (O) in the bearing disc using 40 Nm.
• Mount wedge (M).
6
• Fasten the 2 tailstock screws (Q) in the outer
7
ring using Omnifit Seal 40 Nm or similar
quality and tighten them using 16 Nm.
• Mount pulley with clamping sleeve.
• Tighten the 2 screws (K) using 90 Nm.
8
• Mount V-belts (J).
9
Tighten the belt, see under heading
"Tightening belt" in chapter "Periodic
maintenance".
Drum with bearing
6
7
8
9
J
IMGT4CR16
81