Service
manual
Maintenance - Internal wearing
parts
Cleaning the component unit
The component unit must be checked for
lint and if necessary vacuumed carefully.
1. Fig. 1 Dismount back plate A and
vacuum
2. Reassemble the dryer.
3. Connect the power supply.
4. Function check the dryer.
Dryer with RMC
In order for the residual humidity control to
work in an optimal manner it is important that
the lift rolls inside the drum and the glide
surfaces for the graphite carbon are cleaned.
If these surfaces are not cleaned the
automatic residual humidity control can be
degraded resulting in the garment being
damper than required at the conclusion of the
programme.
Cleaning
Wipe off/clean drum and lifters with citric acid
(Acidum citricum). If soap/softener residue
remains, it is recommended also to use a
coarse sponge.
Cleaning intervals depend on the operational
usage. Cleaning must howeverbe carried out
at least once each month.
It is recommended that the glide surfaces are
cleaned every third to sixth month or as
required.
Periodic maintenance
carefully.
1
A
27