Akai MPC TOUCH User Manual page 57

Tabs
Some modes have buttons at the bottom edge of the touchscreen that let you cycle
through several similar tabs. For instance, you could view the send level that is routed
to each of 4 returns—each level is shown on a separate tab. With each tap, you will
move to the next tab, indicated by the squares below it.
To select a tab, tap it. Each time you tap it, it will select the next tab.
Sliders
To adjust the position of a slider, do any of the following:
•
Tap and drag the slider to the desired position.
•
Tap the desired position (this works only on some sliders).
•
Tap the slider to select it, and then use the Data Dial or –/+ buttons to adjust the position (this
works only on some sliders).
•
Double-tap the slider, and then tap and drag the larger version that appears, or use the Data Dial
or –/+ buttons to adjust the value. Tap anywhere else to return to the previous screen.
57