Akai MPC TOUCH User Manual page 125

Grid View also contains a velocity lane where you can easily adjust note velocities.
The velocity lane in the Grid View.
To show or hide the velocity lane:
1. Tap the up (∧) button in the lower-right corner to show the velocity lane.
2. Tap the up (∧) button once more to show a taller version of the velocity lane. The button will now
show a down arrow (∨).
3. Tap the down arrow (∨) to hide the velocity lane.
Each note's velocity is represented by a vertical bar. The higher and more red the bar is, the higher the
velocity is. Yellow bars indicate a lower velocity. Bars with a gray line at the top indicate a currently
selected note.
To adjust the velocity of the selected notes, tap Velocity at the bottom of the touchscreen, and then
use the Data Dial or –/+ buttons. The numeric value will appear on the screen.
To open the Timing Correct window, press and hold Shift, and then tap TC at the bottom of the
touchscreen. This feature is described already in the
To adjust the metronome settings, press and hold Shift, and then tap Click at the bottom of the
touchscreen. This feature is described already in the
The taller velocity lane in the Grid View.
Main Mode chapter.
Main Mode chapter.
125