Pad Mute Mode - Akai MPC TOUCH User Manual

Pad Mute Mode

To enter Pad Mute Mode, press Menu, and then tap Pad Mute.
There are two tabs you can view in this mode: Pad Mute or Pad Group. Tap each button in the lower-left
corner to select it. See the following
Use the Program field at the top of the touchscreen to select a program.
The counter indicates the current playhead position.
To adjust the position, tap it, and then use the use the Data Dial or the –/+
buttons.
To switch the time increments, double-tap it. You can view it in Bars, Beats,
and Ticks or in hours (HH), minutes (MM), seconds (SS), and frames (FF).
Time Correct lets you quantize pad mutes. This is useful when you want your mutes to line up with a
specific time division. For example, with Time Division set to 1 Bar, your mutes will always align with
the beginning of the measure immediately after you press the pad.
Tap Time Division at the bottom edge of the touchscreen, and select a value from 1/16 to 2 Bars (T
indicates a triplet-based time division).
Tap TC at the bottom edge of the touchscreen to enable or disable the Time Correct feature.
Pad Mute Mode lets you easily mute pads within a program or set mute
groups for each pad.
Pad Mute and Pad Group sections to learn about each.
185