Akai MPC TOUCH User Manual page 141

The upper half of the screen shows the waveform. The lower half shows the editing controls.
The waveform display shows the "active" section of the sample waveform. Swipe left or right on the
waveform to move through it.
Above the waveform is the timeline, shown in Samples, Time (in seconds and milliseconds), or Beats.
You can select the measurement units you want to show in the Settings.
To zoom in or out, do any of the following:
•
When the magnifying-glass icon (in the upper-right corner) is selected, spread or pinch your fingers
(respectively) on the waveform.
•
Tap the Zoom + or Zoom – buttons (respectively) at the bottom edge of the touchscreen.
•
Turn the bottom-most Q-Link Knob in the fourth bank.
To scroll through the waveform, do either of the following:
•
When the magnifying-glass icon (in the upper-right corner) is selected, swipe the waveform left or right.
•
Turn the third Q-Link Knob in the fourth bank.
A sample waveform with a single start point and end point.
141