Using Mpc As A Plugin - Akai MPC TOUCH User Manual

7. Press Play Start to start recording.
8. As you record, move your finger over the XY pad on the touchscreen. The changes in the sound are
being recorded as automation of both the X axis and Y axis parameters.
9. When you are done recording, press Stop.
10. Tap the automation button in the upper-right corner to select the green Read (R) option. This
ensures your track uses the automation you just recorded when you play it back.
See Operation > Modes > XYFX Mode

Using MPC as a Plugin

If you are using another digital audio workstation (DAW), you can use the MPC software as an
instrument plugin (VST, AU, RTAS, or AAX format) within your DAW, which will act as the host software.
The MPC plugin offers the same features and functionality as the standalone software version but with
some notable differences, which are discussed in the
Between Plugin and Standalone Usage
Note: To learn how to load and use an instrument plugin in a host application, please refer to the
corresponding chapter of your host application's manual.
to learn more about using this feature.
Operation > General Features > Differences
chapter.
52