Akai MPC TOUCH User Manual page 124

To move the selected notes, tap Nudge at the bottom of the touchscreen, and then use the Data Dial
or –/+ buttons to shift the notes left or right.
By default, you can position notes only by quantization values, defined by the Time Correct value (learn
about this feature in the Main Mode chapter).
To change the position of notes without restricting ("snapping") them to the grid, tap and hold Don't
Snap in the lower-left corner of the touchscreen, and then use the Data Dial or –/+ buttons to shift the
notes. In this case, each nudge is equivalent to 4 ticks.
To adjust the start point or end point of the selected notes (without changing their position), tap Edit
Start at the bottom of the touchscreen, and then use the Data Dial or –/+ buttons.
To transpose the selected notes up or down, tap Transpose at the bottom of the touchscreen, and
then use the Data Dial or –/+ buttons.
124